USB Load YZXStudio ZL1100 PD3.0 PPS QC2.0 3.0 0-3A QC MTK FCP

$69.99 $59.99

SKU: ZL1100 Category:


Product features

  • High Accuracy: This USB load tester is program control constant current load with 0.1mA accuracy and 11 times per second data reading frequency, suitable for testing the power adapters and battery packs.
  • Support 99% Charging Protocols: Including QC2.0, QC3.0, MTKPE, Samsung AFC, Huawei FCP, Huawei SCP, VOOC, DASH, as well as BC1.2-DCP, Apple 1A/2.1A/2.4A, Samsung 2A.
  • Protocol Triger: This electronic discharging load could be set to almost any charging protocols you want. Set the protocol and click the start to imitate the real load, which can not be achieved by the normal electronic load.
  • Type C Compatible: This load tester could test the charging cable resistance and verify the real performance and quality of the cables through the Type C and Micro USB female port.
  • Serial Port Connection: Built-in CH340G USB to UART chip supports data transferring to PC and firmware updating.

Product description

USB Electronic Discharging Load for Testing Performance of Adapter, Cable and Battery Packs
Input Voltage Range: 0-24V
Voltage Resolution: 0.0002V
Input Current Range: 0-3A
Current Resolution: 0.0001A
Deviation: <0.2%
Quick Charge Protocol Supported:QC2.0, QC3.0, MTKPE, Samsung AFC, Huawei FCP, Huawei SCP, VOOC, DASH
Normal Charge Protocol:BC1.2-DCP, Apple 1A/2.1A/2.4A, Samsung 2A
Power Supply Needed: 4.5-5.5V, 500mA
Display: TFT LCD Screen.
With Heat Disspation Fan: Yes
Heat Sinks Material: Alloy similar to the ones used to PC CPU heat sinks.
Housing: PCB material
Memory Type: FRAM memory with 10 billion time rewrite capability.
USB Plug: MOLEX USB plug
Buttons: ALPS silicon button.
Fast setting current within 0.5 second.
Stepless change current scanning to accurately detect the max current and power of the adapter.


There are no reviews yet.

Be the first to review “USB Load YZXStudio ZL1100 PD3.0 PPS QC2.0 3.0 0-3A QC MTK FCP”

Your email address will not be published. Required fields are marked *